Magnetic coupling rodless cylinder |
|||||
![]() |
Extract from catalogue - magnetic coupling rodless cylinders (1.9Mb) |
![]() |
Drawings DXF |
![]() |
Drawings DWG |
3D drawings in STP format - documents freely available with registration | |||||
|
TR |
Magnetic coupling rodless cylinder |
|
TR series magnetic coupling cylinders are rodless cylinders that use the magnetic force of permanent magnets to strongly link the outside slide to the inside one. Both of them slide onto a stainless steel tube with two end caps. The high magnetic coupling force due to the use of special permanent magnets allows to move heavy loads. Its main advantage compared to the “band” version is the total absence of leakage that allows the use in harsh work environment. TR series is equipped with pneumatic cushioning. |
Order codes | |||||
T | R | M | . | 0 | 4 | 0 | . | 0 | 5 | 0 | 0 | . | A | A | |||
1 | 2 | 3 | 4 | 5 | |||||||||||||
1 | Typology |
TR | Magnetic coupling rodless cylinder |
2 | Version |
B | Standard cylinder |
A | Cylinder with no rotating device |
S | Guided cylinder with sliding bushings |
R | Guided cylinder with ball bearing |
3 | Bore |
… | Ø 40 mm |
4 | Standard stroke |
… | 100-125-160-200-250-300-350-400-450-500-600-700-750-800-900-1000 mm |
5 | Variants |
AA | Pneumatic cushioning: with cushions on one side only |
NA | Pneumatic cushioning: not present |
SM | Piston: non magnetic |
Code example | |||||
Guided magnetic coupling cylinder with ball bearings, magnetic and cushioned, bore 40 mm, stroke 500 mm. | |
TRR.040.0500 | |
Magnetic switches | |||||
![]() |
|
![]() |
Extract from catalogue - magnetic switches (5.8Mb) | |
TRB.040; TRA.040; TRS.040; TRR.040; |