......................................................................

Italian - ItalyEnglish (United Kingdom)Español(Spanish Formal International)

......................................................................

AIRON s.r.l.
Via Marcinelle n° 8
45100 BORSEA (RO) - ITALY
Phone: +39 0425 471575
Fax: +39 0425 404037
info@airon-pneumatic.com

C.F. - P.IVA - N. REG. IMP. IT 01099010298
N. ISCR. R.E.A. 127012

Twin piston rod cylinders

Extract from catalogue - twin piston rod cylinders (1Mb)

Drawings DXF
Drawings DWG

3D drawings in STP format - documents freely available with registration


A2
Two piston rod cylinder


A3 Three piston rod cylinder

Twin piston rod no rotating cylinders “A2...” series represents the simplest solutions for cylinder rod guidance.
Overall dimensions are almost the same of ISO 15552 standars cylinders, of whom they uses the same fixing accessories.
They are a reliable system to avoid piston rod rotation and they are esy to fit in any application.
Available in the following bores: 25, 32, 40, 50, 63, 80, 100 mm, pneumatic cushion and presetted for the use with Airon's sensor as standard.
Beside “A2...” series there is 3 piston rod version “A3...” and the through-rod version “A2...SP” , “A3...SP”.

Order codes
A 2 P . 0 3 2 . 0 1 0 0 . 0 0
1 2 3 4 5
1 Typology
A2 Cilindro a 2 steli gemellati (Ø25, 32, 40, 50, 63, 80, 100)
A3 Cilindro a 3 steli gemellati (Ø32, 40, 50, 63)
2 Version
P AStandard cylinder with round barrel for Ø25 and profiled barrel from Ø32 to 100 mm
F Cylinder with profiled barrel for foldaway magnetic switches from Ø32 to 100 mm
T Round barrel with tie rod cylinder from Ø32 yo 100 mm
4 Bore
Ø 25·32·40·50·63·80·100 mm
5 Standard stroke
25-40-50-80-100-125-160-200-250-300-400-450-500 mm
6 Variants
SP Version: with one through piston rod
A4 Version: AISI 304 stainless steel
VS piston rod seal: fluorine rubber (max temperature: 150°C)
GV All seals: fluorine rubber (max temperature: 150°C)
P4 Plate: AISI 304 stainless steel
SM Piston: non magnetic
AA Pneumatic cushioning: front only
AP Pneumatic cushioning: rear only
NA Pneumatic cushioning: not present
VA Fixing: front screw (Ø25 e Ø32)
PA Extension for EN 349 standards
F4 Crews: AISI 304 stainless steel

 

Code example
Twin piston rod cylinder with profiled baller for foldaway magnetic switches, bore 32 mm and stroke 100 mm.
A2F.032.0100

 

Magnetic switches


Extract from catalogue - magnetic switches (5.8Mb)

 

A2P.025; A2P.032; A2F.032; A2T.032; A3P.032; A3F.032; A3T.032; A2P.040; A2F.040; A2T.040; A3P.040; A3F.040; A3T.040; A2P.050; A2F.050; A2T.050; A3P.050; A3F.050; A3T.050; A2P.063; A2F.063; A2T.063; A3P.063; A3F.063; A3T.063; A2P.080; A2F.080; A2T.080; A3P.080; A3F.080; A3T.080; A2P.100; A2F.100; A2T.100; A3P.100; A3F.100; A3T.100;