Guiding unit

			Guiding unit

Extract from catalogue - guiding unit (2.7Mb)	Drawings DXF	Drawings DWG

3D drawings in STP format - documents freely available with registration

GC	C geometry


GH	H geometry


GL	L geometry

GH, GC and GL guide units are translation systems that can be used with ISO 15552 and ISO 6432 standard cylinders from 12 to 100 mm diameter.
They are available in three different shapes with C, H and L geometry ; the last two (H and L) can be supplied with slide bearing made of self lubricating brass bearing or ball bearing to give a low friction factor.
It’s easy to place them in every machine or equipment because they have many fixing holes on their body and plate; moreover they are machined with great accuracy in order to give the best performance when they are used for accurate positioning.

			Order codes

GH	R	.	0	6	3	.	0	1	2	5	.	0	0



1	2		3				4					5

1	Typology

GC	C geometry

GH	H geometry

GL	L geometry


2	Version

S	Slide bearings

R	Roller bearings (for GH and GL)


3	Bore

…	GL...:Ø 25 mm GC...:Ø 20-25-32-40-50-63-80-100 mm GH...:Ø 20-25-32-40-50-63-80-100 mm


4	Standard stroke

…	25-40-50-75-80-100-125-150-160-200-250-320-400-500-600-700-800-900-1000 mm


5	Variants

RS	Wiper for dusty environments

PA	Extension for accident prevention EN 349 standard

AC	Guide rods, AISI 304 chromium plated steel (only for GHS, GCS)

F4	Screws, compensation joint: AISI 304 stainless steel

P4	Plate, screws, compensation joint: AISI 304 stainless steel

			Code example

Guiding unit with H geometry, with roller bearings for ISO 15552 cylinder, bore 63 mm and stroke 125 in accident prevention version.
GHR.063.0125.PA

GLS.025; GLR.025; GCS.020; GCR.020; GHS.020; GHR.020; GCS.025; GCR.025; GHS.025; GHR.025; GCS.032; GCR.032; GHS.032; GHR.032; GCS.040; GCR.040; GHS.040; GHR.040; GCS.050; GCR.050; GHS.050; GHR.050; GCS.063; GCR.063; GHS.063; GHR.063; GCS.080; GCR.080; GHS.080; GHR.080; GCS.100; GCR.100; GHS.100; GHR.100;