ISO 6432 cylinders |
|||||
![]() |
![]() |
Drawings DXF |
![]() |
Drawings DWG |
|
3D drawings in STP format - documents freely available with registration | |||||
|
BA |
Minicylinder ISO 6432 - Ø 8·10·12·20·25 mm |
|
SA | Minicylinder derived from ISO series, rear inlet port in line |
|
TA | Minicylinder derived from ISO series, no rear hinge | |
Pneumatic cylinder "BA" series are actuators made in compliance with ISO 6432. |
Order codes |
|||||
B | A | M | . | 1 | 6 | . | 0 | 0 | 2 | 5 | . | V | S | . | S | E | A | |||
1 | 2 | 3 | 4 |
5 |
6 | |||||||||||||||
1 | Typology |
BA | Minicylinder ISO standard |
SA | Minicylinder derived from ISO series (compact) - Rear inlet port in line |
TA | Minicylinder derived from ISO series (compact) - No rear hinge |
2 | Version |
A | Non magnetic with adjustable end-of-stroke shock absorbers (BA and TA only, Ø16-20-25 mm) |
C | With pneumatic cushioning and magnetic (BA and TA only, Ø16-20-25 mm) |
M | Magnetic |
S | Non magnetic |
3 | Bore |
… | Ø 8·10·12·16·20·25 mm |
4 | Standard stroke |
… | 10-25-40-50-75-80-100-125-150-160-200-250-300-320-400-500 mm |
5 | Variants |
SP | Version: through rod |
SEA | Version: single acting cylinder front spring |
A4 | Piston rod and rod nut: AISI 304 stainless steel |
A6 | Piston rod and rod nut: AISI 316 stainless steel |
SS | Piston rod and rod nut: no thread undercut |
VS | Rod seal: fluorine rubber (max temperature: 150°C) |
GV | All seals: fluorine rubber (max temperature: 150°C) |
AA | Pneumatic cushioning: front only |
AP | Pneumatic cushioning: rear only |
6 | Special versions |
AM.. | Screw tap rod end with lenght on request |
WH.. | Rod protrusion on request |
SF | Female screw thread rod end |
SD | Rod end according to the customer's drawings |
KK | Metrical thread |
Code example |
|||||
Cylinder ISO 6432 with magnetic piston and micrometric pneumatic cushioning, bore 16 mm and stroke 200 mm. | |
BAC.16.0200 | |
Magnetic switches |
|||||
![]() |
|
![]() |
Extract from catalogue - magnetic switches (5.8Mb) | |
BAA.08; BAC.08; BAM.08; BAS.08; BAA.10; BAC.10; BAM.10; BAS.10; BAA.12; BAC.12; BAM.12; BAS.12; BAA.16; BAC.16; BAM.16; BAS.16; BAA.20; BAC.20; BAM.20; BAS.20; BAA.25; BAC.25; BAM.25; BAS.25; SAM.08; SAS.08; ; SAM.10; SAS.10; SAM.12; SAS.12; SAM.16; SAS.16; SAM.20; SAS.20; SAM.25; SAS.25; TAA.08; TAC.08; TAM.08; TAS.08; TAA.10; TAC.10; TAM.10; TAS.10; TAA.12; TAC.12; TAM.12; TAS.12; TAA.16; TAC.16; TAM.16; TAS.16; TAA.20; TAC.20; TAM.20; TAS.20; TAA.25; TAC.25; TAM.25; TAS.25; |