News -new products

			News

CE	Electrical cylenders

The CE... electric cylinder are linear actuator combined with step motor that allow, thanks to the incremental integrated encoder and the driver to move a load with the perfect control of speed, acceleration, deceleration, push and pull force and the end position to get. The cylinders are available in 4 different bore sizes 25 - 40 - 50 - 80, with integrated no rotating rod system and axial or parallel motor joint. The front and rear (only for parallel motor) fixing holes, the rod dimentions are in according to ISO 15552 so it’s possible to use many fixing accessories to ISO 15552 cylinders.

POTM	Cylinder with magnetostrictive position transducer

Cylinder with magnetostrictive transducer series POTM are actuators mode following ISO 15552 standard (except Ø50mm bore). Magnetostrictive technology allow a better accuracy than potenziometric ones. Output signal is analogic (0-10V) and the connector is M12 male.

SMTF	Magnetic switches

The new "hidden" SMTF sensor series ... combines the simplicity and safety of mounting in the T-slot with the optimum positioning technology compared to the magnetic field available in the electronic version.
The sensors are supplied complete with 2 label holders and a cable locking bracket in the quarry, coupled with the availability of brackets for lobe, tie and round fastening, make these sensors suitable for universal use inside the machine

EPC8	Direct solenoid valve on modular manifold

The series EPC8 direct solenoid valve are designed to use on modular manifold that can be supply already assembled or, with the kits, they can be assembled from the customer. With an armature diamter of Ø9mm they are design only 3/2 normally closed version with a supply hole diameter Ø1mm and the manual override.

EPHF
High frequency direct solenoid valve

3 Port Solenoid Valve Direct Operated Poppet Type series EPS8M-HF and HHF is a valve which main feature is a great use flexibility due to its working principle. Its working principle is based on the totally poppet moved directly by the mobile coil that guarantee fast and basically independent response time by the pressure; it can be used with vacuum as well. Available in high frequency and fluorinate elastomer seals version, it can be used to solve many circuit applications as the “USE” section shows.

EFL	Valves for fluids

EFLD pilot solenoid valves can work with air, water and steam (with steam the max pressure doesn’t exceed 5 bar). The big choice of nominal flow
with two sizes and 4 operations make this product extremely flexible; the two back threaded holes allows to attach the valves in many different
positions.
The poppet structure, simple and reliable allow at that valves more life reducing maintenance. In the end it’s possible to order normally closed versions
whit manual override.

The direct pilot solenoid valve with linked diaphragm EFLV series are diaphragm valves that allow to achieve good flow without a minimum warking pressure. They are available in 4 sizes from G3/8 to G1 with 3 different nominal orifice sizes.

EFLS indirectly pilot solenoid valve are 2 ways and 2 positions diaphragm valves. That allow to equip this valves with big nominal orifice. They are piloted by an electric pilot with a 10mm armature, due to their internal structure, a minimum working pressure and a delay during the opening phase, for the G1 1/4 and G2 versions it could be adjusted with a screw.

They are available in 2 monostable versions with 5 type of nominal orifice and sizes from G3/8 to G2. Also that series can be used with air or water and the
normally cloused can be ordered with manual override

JRE/JWE	Regulator and filter-regulators with integrated electronic pressure switch

JRE series pressure regulators and JWE series filters-regulator can be supplied with integrated pressure switches series PE.41. This solution allows to reduce overall dimension and increase the robustness of the whole regulator-pressure switch assembly. Electronic pressure switch PE.41 can be ordered after market.

JRPR	Precision regulator

JRPR... precision regulator is deal for all applictions in which are necessary a precision regulation of the outlet pressure. With a sensible pressure relief it's suitable in all applications in which speed of response are important. Betwenn the avaiable accessories (analog gauge and wall bracket), it's avaiable a digital gauge with cable or M8 connector that allow to handle bar cents.

JRTF	Air bleed compact regulators

Il JRTF.14 regulator is a compact, light and cheap pressure regulator with diaphram and air bleed. It's improuvements than other regulators (JRQ and JRT series) are an increase control of pressure relief and more precise regulation of the outlet pressure. It can be fixed on panel by means of an optional bracket.

PE43	Electronic pressure switch

Electronic pressure switches PE.43 series in an electronic devices to check air pressure and it allows, in its three versions, to monitor pressure from -1 bar to 10 bar. It's equippedwith voltage analogue output or current analogue output and two PNP or NPN outputs. the wide display, split into sections, allowa to easy control all the electronic pressure functions and it changes color when the select pressure value has been reached.

PE45	Electronic pressure switch

Electronic pressure switches PE.45 series in an electronic devices to check air pressure and it allows, in its three versions, to monitor pressure from -1 bar to 10 bar. It's equippedwith voltage analogue output or current analogue output and two PNP or NPN outputs. the wide display, split into sections, allowa to easy control all the electronic pressure functions and it changes color when the select pressure value has been reached. The PE.45 electronic pressure switch can get the IP65 degree of protection when it's use the dustproof protector (supplied).

PE47 Electronic pressure switch

Electronic pressure switch PE.47 series is an electronic and convenient device to check the air pressure and manage pressure and vacuum (-1 to 10 bar) with great accuracy. Available with double digital output or digital and analogue (voltage). Wide display, split in two sections, allows to easy control all the electronics pressure functions and it changes color when the selected pressure value has been reached.

JH	High pressure air treatment

JHF series are used to filtering from particles and condensing the moisture inside compressed air. This kind of filtered are strong and reliable, it can work with a max pressure of 40bar. The big filtering surface to filtering element allows to keep constant the flow rate even in hard working conditions. The condensed moisture discharge is manual when the filter is pressurized and automatic when it is depressurized.

JHR high pressure regulator are used to mantain costant the downstream pressure with integrated relieving system. THey are available in two sizes and they can support 40bar maximun inlet pressure. The maximum pressure regulated are 35bar.

JHW series filter/regulators for high pressure joins the functions of JHF filter and JHR pressure regulators combiningthe compactness and simplifyng maintenance.